Tile and Grout
How to Clean Natural Stone Floors Without Etching Them
Dust mop, then damp-mop with a pH-neutral stone floor cleaner. Why vinegar etches marble, whether you can steam mop, and a water-drop test for resealing.
Quick answer: Dust mop with a clean, non-treated microfiber dust mop, then damp-mop with a pH-neutral stone floor cleaner. Rinse thoroughly, and dry the floor. Skip vinegar, lemon juice, bathroom cleaners and steam mops. A penetrating sealer can help with stains, but it will not stop etching.
Marble, travertine, slate, limestone and granite floors around Sandy, OR stay nicer with a gentle routine than with a harsh one. This guide is everyday floor care: lifting grit, mopping with a pH-neutral cleaner, and avoiding the acids that etch calcareous stone. For gray grout joints, see our guide to cleaning and sealing grout. Soap film on shower walls is a different job; see our guide to cleaning soap scum off shower tile.
Affiliate disclosure: Some links in this article go to products on Amazon. As an Amazon Associate, we may earn from qualifying purchases. The price you pay stays the same.

What etching is, and how it differs from a stain
The Natural Stone Institute groups stone as calcareous or siliceous. Marble, limestone and travertine are calcareous: they are mostly calcium carbonate, which is sensitive to acid. Granite, slate and sandstone are siliceous and resist kitchen acids better, though the Institute still does not recommend acidic cleaners, because those stones may contain trace minerals that are acid-sensitive.
Etching is not a stain. LATICRETE describes it as a chemical reaction when acid touches a reactive surface. On polished stone it looks like a water spot, or like polish that has worn off. Daltile is direct about marble and limestone: the result is not a stain you can clean out, but an etching that cannot be removed without refinishing, usually a dull spot in the surrounding gloss. A sealer can buy time to wipe a spill, but LATICRETE notes that sealing cannot stop that reaction.
How to clean natural stone floors, step by step
- Identify the stone and pretest. Confirm whether the floor is marble, travertine, limestone, slate or granite, and read the cleaner label. Daltile and LATICRETE both say to test a small area first.
- Dust mop with a clean, non-treated microfiber dust mop. The Natural Stone Institute and Daltile say to dust mop interior floors often with a clean, non-treated dry dust mop. Sand, dirt and grit do the most damage, because they are abrasive. If you vacuum, Daltile warns that worn attachments and wheels can scratch stone. Put a mat at the door, with a slip-resistant backing.
- Blot spills immediately. The Natural Stone Institute says to blot with a paper towel, not to wipe, which spreads the spill. Rinse and dry. On marble and limestone, lift acidic spills such as wine or tomato right away.
- Use a pH-neutral stone floor cleaner. Use a cleaner made for natural stone, and follow the label. Miracle Sealants' Tile & Stone Cleaner datasheet describes it as a pH-neutral cleaner for tile, stone and grout, including marble, granite, limestone and travertine, and for floors. The 32 oz spray is ready to use: after removing loose dirt, spray it onto the surface.
- Damp-mop, or use a refillable spray mop. Miracle's datasheet says to apply the cleaner with a clean mop, allow the solution to stand for 10 minutes while agitating periodically, and not to let it dry on the surface. A refillable spray mop filled with the same ready-to-use cleaner is a good alternative if you want to skip a bucket. Keep the pad damp, not soaking.
- Rinse the cleaned area thoroughly. Miracle's datasheet says to rinse the surface thoroughly with hot water and allow it to dry. The Natural Stone Institute also says to rinse thoroughly after a soap solution, change the rinse water often, and dry with a soft cloth. Too much cleaner can leave a film.
- Dry the floor completely. Buff dry with a clean microfiber cloth, and wait until the floor is dry before walking on it. LATICRETE notes that wet stone floors tend to be slippery. MAPEI says not to leave standing water, which can leave hard-water deposits.
What you'll need
- pH-neutral stone floor cleaner: Miracle Sealants Tile & Stone Cleaner, 32 oz spray. Miracle's datasheet describes it as a pH-neutral cleaner for tile, stone and grout, including marble, granite, limestone and travertine, and for floors. The 32 oz spray is ready to use. Follow the label, including the rinse and the instruction not to let the solution dry on the surface.
- Microfiber dust mop for stone floors: Libman 18-inch 2-Sided Microfiber Dust Mop. The listing says the fingers side picks up dust, dirt and pet hair, and the flat side is for mopping with your floor cleaner. Use it dry first, then damp with the pH-neutral cleaner.
- Spray mop for marble floors: OXO Good Grips Microfiber Spray Mop & Scrubber. The listing says it is ideal for hard floors, with a refillable bottle for your own solution. Fill it with the ready-to-use pH-neutral stone cleaner, not a vinegar refill. Use the microfiber pad, and pretest the slide-out scrubber on polished stone.
- Stone floor sealer, if the water-drop test calls for it: Miracle Sealants 511 H2O Plus Water-Based Penetrating Sealer, 1 quart. Miracle's datasheet calls it a water-based penetrating sealer that will not alter the natural look, and lists marble, granite and travertine among ideal substrates; the manufacturer's product page also lists limestone. Follow the label, including the pretest and wiping off all excess.
- Clean microfiber cloths for drying, and a mat at each door.
Add all 4 items to your Amazon cart
The cart link adds the Miracle Sealants pH-neutral stone floor cleaner, the Libman microfiber dust mop, the OXO spray mop and the Miracle Sealants 511 H2O Plus sealer. The sealer is for when the water-drop test shows the stone is absorbing. Review variants, seller and quantities before checkout; Amazon may ask you to sign in.

How to clean marble floors without etching
On marble, skip anything acidic and stick to the pH-neutral routine above. Daltile says even a light vinegar-and-water solution will etch and eventually damage many kinds of natural stone. Blot spills fast, dust mop often, and dry after mopping.
Travertine floor cleaning and limestone follow the same method. Daltile notes that light-colored marble and nearly all limestone stain easily, and that limestone is especially absorbent, so a penetrating sealer is often worthwhile. Travertine can have filled pits; Daltile says some fill can loosen with traffic, which is maintenance, not a cleaning failure.
Slate floor cleaning and granite use the same pH-neutral damp mop. LATICRETE says granite, slate and sandstone typically will not etch the way marble does, but the Natural Stone Institute still advises against acidic cleaners. MAPEI notes that heavily textured stones such as slate need more frequent cleaning than a smooth floor, because soil hides in the clefts.
Can you use vinegar on natural stone floors?
No. The Natural Stone Institute says products containing lemon, vinegar or other acids may dull or etch calcareous stones. MAPEI says that even when diluted, vinegar can damage honed or polished marble, limestone and travertine, as well as cement-based grout, over time and sometimes on contact. Use a pH-neutral stone floor cleaner instead.
Can you steam mop natural stone floors?
We don't recommend a steam mop as the regular method. Aqua Mix notes that a sealer may be damaged by steam cleaning, and that sealed surfaces should be maintained with a pH-neutral cleaner. MAPEI says to avoid the regular use of steam cleaners, because they can reach temperatures that exceed grout limits.
How to tell if a stone floor needs resealing
Sealer helps with stains, not etching. The Natural Stone Institute describes stone sealers as impregnators that act as a repellent: they make the stone more stain resistant, not stain proof, and some stones do not need sealing.
LATICRETE's sealed-stone test is a simple water-drop test. Put a small puddle of water, about an inch across, on a clean, dry area of the stone, cover it so it does not evaporate, and wait 20 minutes. If the water looks unchanged and the stone has not darkened, a sealer is present, or the stone is dense enough that it may not need one. If the water is soaking in, LATICRETE recommends a penetrating sealer. Miracle Sealants 511 H2O Plus is a water-based penetrating sealer; Miracle's datasheet lists marble, granite and travertine among ideal substrates, and the manufacturer's product page also lists limestone. Follow the sealer's label. For the grout lines, use the sealing steps in the grout guide already linked above.

Mistakes that etch or dull stone floors
- Cleaning with vinegar, lemon or other acids. They can etch marble, limestone and travertine, and they can wear cement grout.
- Using a steam mop as the weekly method. Steam can damage a sealer and can exceed grout temperature limits.
- Scrubbing with abrasive powders or scouring creams. The Natural Stone Institute notes that those often contain abrasives that can scratch certain stones.
- Using a treated or oily dust mop. MAPEI says never to clean stone floors with dust mops treated with dust-collecting sprays, oils or treatments.
- Using all-purpose or bathroom cleaners. MAPEI and LATICRETE both warn that general-purpose cleaners can harm stone or break down a sealer.
- Leaving the floor wet, or using too much cleaner. Standing water can leave deposits, and leftover cleaner dries into a film.
When to call a pro
Call a professional if polished stone looks dull or already etched, if a stain will not lift, if travertine fill is coming out, if grout is cracked or crumbling, or if a large floor will not come clean with a home pass. Etched stone usually needs professional refinishing, not another round of cleaner. Our tile and grout cleaning service covers natural stone floors, with stone-safe, pH-neutral products and a test of a small area first.
Sandy Carpet Cleaners is one call away
We clean natural stone floors with stone-safe products for homes in Sandy, OR and nearby towns from Gresham to Estacada. Call (971) 446-7578 for a free written quote. Phone hours are Mon–Fri, 8 AM–6 PM, and you can also email info@sandycarpetcleaners.com.
Natural stone floor cleaning FAQ
Can you use vinegar on natural stone floors?
No. The Natural Stone Institute says vinegar and other acids may dull or etch calcareous stones such as marble, limestone and travertine. Use a pH-neutral stone floor cleaner instead.
Can you steam mop natural stone floors?
We don't recommend it as the regular method. Aqua Mix warns that steam cleaning can damage a sealer, and MAPEI says steam cleaners can exceed grout temperature limits. Damp-mop with a pH-neutral cleaner instead.
How do you clean marble floors without etching them?
Dust mop first, then damp-mop with a pH-neutral stone floor cleaner, rinse thoroughly, and dry. Skip vinegar, lemon, bathroom cleaners and abrasive pads. Blot acidic spills immediately. A sealer helps with stains but will not prevent etching.
How do you tell if a stone floor needs resealing?
Use a water-drop test. LATICRETE's method is to place a small puddle of water on the stone, cover it, and wait 20 minutes. If the water soaks in and the stone darkens, a penetrating sealer labeled for that stone is recommended. If the water is unchanged, a sealer is present or the stone may be dense enough that it does not need one.
What is the difference between etching and staining on a stone floor?
A stain is discoloration from something absorbed into the stone. Etching is a chemical dulling of the surface from acid. Daltile says an etch cannot be removed without refinishing the stone. On polished marble it usually looks like a dull spot.
More articles
- How to Clean Mattress Stains and Odors at HomeBlot mattress stains with little water, dry the bed fully, and see when a stain or odor means you should call a pro.
- Best Everyday Vacuums for Homes with PetsA CRI Seal of Approval shortlist for pet hair on carpet, plus how often to vacuum and when a vacuum is not enough.
- How to Get Pet Vomit Smell Out of CarpetScrape and blot pet vomit, then treat the odor with a pet enzyme cleaner. Why vomit differs from urine, and when the smell means you should call a pro.
Free quote
Let's get your floors fresh
Tell us what needs cleaning in Sandy, Oregon, or nearby. We'll get back to you during phone hours, Mon–Fri 8 AM–6 PM, and we can book after-hours and weekend appointments. Questions first? Read the FAQ.
