Stains
How to Get Grease Out of Carpet
Scrape and blot, then lift grease with dilute dish soap, a cold-water mist rinse and weighted towels. When to use a solvent spotter, and when to call a pro.
Quick answer: Scrape up any solid grease with a spoon and blot liquid oil with a dry white cloth, without rubbing. Pretest, then blot the spot with a dilute clear dish-soap solution, about 1/4 teaspoon per cup of lukewarm water, working from the edges in. Rinse with a cold-water mist, blot, and dry it under weighted white towels. For heavy or automotive grease, a solvent spotter applied to a cloth, never poured on the carpet, may be needed first.
Water alone won't move grease. Bacon fat off the stove, a buttery dropped plate or bike chain oil carried in from the garage all leave a spot that seems to grow when you touch it. The right order and a light hand get most fresh grease out.
Affiliate disclosure: Some links in this article go to products on Amazon. As an Amazon Associate we earn from qualifying purchases. The price you pay stays the same.

Why grease behaves differently from other spills
Coffee, wine and mud respond to blotting, water and vacuuming. Grease is oil: it doesn't mix with plain water, it spreads when rubbed, and it holds onto dirt, which is why an old grease spot often looks gray. The Carpet and Rug Institute (CRI) notes that oily soil can be very difficult to remove once it has been on carpet a long time, so speed matters more than strength.
Shaw Floors' stain chart separates the two kinds of grease you're most likely to meet. For food grease and cooking oil it calls for a solvent step followed by a detergent step. For automotive grease it lists the solvent step alone.
How to get grease out of carpet, step by step
Open a window or run a fan, and keep children and pets away.
- Remove what you can, dry. Scrape up butter or other semi-solid grease with a rounded spoon. Blot liquid oil with a dry white cloth, pressing straight down and turning to a clean area each time. Don't rub or add water yet.
- Pretest your solution. CRI's method is to put a few drops on a hidden area, hold a white cloth on it for 10 seconds, then check the cloth and carpet for color transfer or damage. Use another solution if anything changes.
- Use a solvent only if the grease is heavy or automotive. Shaw Floors describes applying a solvent spotter to a dry cloth and blotting, and CRI prefers a non-flammable, dry-cleaning-type spot remover. Never pour or spray solvent straight onto carpet. CRI warns it can reach the backing and damage the latex that holds the carpet together. Check the label for carpet use and flammability, ventilate, and keep it far from gas burners, pilot lights and wood stoves.
- Blot with dilute dish soap. Mix 1/4 teaspoon of clear liquid dishwashing detergent into 1 cup of lukewarm water. CRI warns never to make it stronger. Mist it onto a white cloth, work it in gently from the edge toward the center, wait a few minutes, then blot. Keep going while grease is still transferring to the cloth.
- Rinse with a cold-water mist. CRI recommends a mist sprayer to avoid overwetting and several rinses to remove residue. Mist lightly, blot, and repeat.
- Dry under weight. Lay about a half-inch of white paper towels or folded white towels over the spot and weigh it down with something flat that won't transfer color, such as a jug of water.
- Check once it's dry. If a faint shadow returns, repeat steps 4 through 6. Once it stays clean, vacuum to lift the pile.

CRI also notes that a dry, absorbent cleaning compound may be used as a substitute to cut drying time. If you use one, follow its label.

What you'll need
- Spray bottles with a mist setting: MR.SIGA 16 oz Spray Bottles, 3 pack.
- White cotton towels: Utopia Kitchen White Flour Sack Towels, 12 pack. White cloth shows when grease is transferring and won't bleed color.
- Dry absorbent carpet cleaner (optional): Capture Carpet & Rug Dry Cleaner with brush, 1 lb. The listing says it contains no solvents and is safe on wool. Follow the label.
- A rounded spoon, a clear dish soap without bleach, lanolin or brighteners, a measuring spoon, white paper towels and a fan.
Add all 3 items to your Amazon cart
The cart link includes one 3-pack of 16 oz spray bottles, the white towel 12-pack and one 1 lb Capture dry cleaner. Review variants, seller and quantities before checkout; Amazon may ask you to sign in.
Mistakes that spread grease
- Rubbing or scrubbing. Oil spreads outward and the pile frays.
- Using a stronger soap mix. Extra detergent leaves a sticky residue, and CRI says residue is the most common reason a spot comes back.
- Pouring solvent on the spot. It can soak through to the backing and loosen it.
- Reaching for laundry or dishwasher detergent. CRI warns that laundry detergents can contain optical brighteners that dye the fiber, and that many dishwasher detergents contain bleaching agents.
- Using garage degreasers or fabric-only stain removers. Some popular laundry spotters say right on the label not to use them on carpeting. Read the label before anything touches the floor.
- Working near an open flame. Some aerosol spot lifters are labeled extremely flammable.
When to call a pro
Call a professional if the grease covers more than a small spot, if it's motor oil or tar, if it has turned dark with age, if the carpet is wool or another natural fiber, or if the spot keeps returning after it dries. CRI notes that professionals can use stronger solutions and equipment for stubborn spills. Our carpet stain removal service covers how we test, pre-treat and clean set-in spots.
Sandy Carpet Cleaners is one call away
We treat grease and oil spots for homes in Sandy, OR and nearby towns from Gresham to Estacada. Call (971) 446-7578 for a free written quote. Phone hours are Mon–Fri, 8 AM–6 PM, and you can also email info@sandycarpetcleaners.com.
Grease on carpet FAQ
Does dish soap get grease out of carpet?
Often, for fresh kitchen grease. Use only 1/4 teaspoon of clear dish liquid per cup of lukewarm water, and rinse thoroughly.
Is it safe to use a solvent spot remover on carpet?
Only one labeled for carpet, and only applied to a cloth. CRI prefers non-flammable, dry-cleaning-type products and warns against letting solvent reach the backing. Ventilate and keep it away from flames.
Why did the grease stain come back?
CRI says spots that reappear are most often caused by cleaning solution or sticky residue left in the carpet. Rinse again, dry under weighted towels, and recheck.
How do I get motor oil out of carpet?
Shaw Floors treats automotive grease with a solvent blotted on from a cloth rather than with soap and water. A large or old motor-oil spot is usually a job for a pro.
Should I use hot water on a grease stain?
No. CRI's grease guidance calls for lukewarm detergent and a cold-water rinse, and Shaw Floors says warm, not hot.
More articles
- How to Clean Mattress Stains and Odors at HomeBlot mattress stains with little water, dry the bed fully, and see when a stain or odor means you should call a pro.
- Best Everyday Vacuums for Homes with PetsA CRI Seal of Approval shortlist for pet hair on carpet, plus how often to vacuum and when a vacuum is not enough.
- How to Get Pet Vomit Smell Out of CarpetScrape and blot pet vomit, then treat the odor with a pet enzyme cleaner. Why vomit differs from urine, and when the smell means you should call a pro.
Free quote
Let's get your floors fresh
Tell us what needs cleaning in Sandy, Oregon, or nearby. We'll get back to you during phone hours, Mon–Fri 8 AM–6 PM, and we can book after-hours and weekend appointments. Questions first? Read the FAQ.
